08
May
2022
In
Steel Dryers
Material Properties Since steel is a stronger material and has a modulus of elasticity which is considerably more than 2.1 times higher than cast iron, while designing the pressure vessel
All posts in Paper Machine
-
-
07
May
2022
In
Air Cushion Headbox
Index Quality of Head Box The cross base weight difference is ≤ ±1.5%; Appraisal base weight is 200 g/m2) The Opening width difference between upper slice and bottom lip is
-
07
May
2022
In
Top Dewatering Former
Top former is a part of the PM wire part. It is installed between the under-pressure and suction boxes, approximately in the second third of the wire table. Its most
-
07
May
2022
In
High Speed Rewinder
Rope threading system is used for rewinding and longitudinal slitting of the paper web from the paper machine reel spool into paper rolls of required sizes. Design The winding part
-
06
May
2022
In
Regular Headbox
Open Head Box for Machine speed up to 350 meters/ minute.Slice width up to 3 800 mm are regularly manufactured.Profile variation across the deckle in maximum ±3 GSMCylindrical Tapered and
-
01
May
2022
In
Offline Coating
Coating Station Coated paper or gloss paper is paper that has been coated by a mixture of materials or a polymer to impart certain qualities to the paper, including weight,
-
01
May
2022
In
Online Coating
Coating Station Coated paper or gloss paper is paper that has been coated by a mixture of materials or a polymer to impart certain qualities to the paper, including weight,
-
01
May
2022
In
Regular POPE Reel
Pope Reeler is designed on the principle of Friction Winding. Primary Grab Arm is Pneumatically/Hydraulically loaded and tilted Hydraulically/mechanically with manual operation. Secondary arm is loaded Pneumatically/Hydraulically Pope drum is
-
24
Dec
2021
In
Hydraulic Headbox
Hydraulic headbox operates without air cushion and is fully filled with paper stock. It has some elements as classical high pressurized closed headbox. Main difference lays in built-in block with
-
24
Dec
2021
In
Tri-Nip Multi-Nip Press Part
The multi-nip press part – TRI-NIP is one of the possible configurations of press rolls in the press part. The TRI-NIP is a compact set of four press rolls forming