Conveying Systems

Conveyors are used for conveying waste paper, bales of chemical pulp or bags with chemicals to pulpers, for removal of rejects from separators, for conveying dry broke to pulpers or for paper rolls handling.

Design

The material is unloaded on the ingoing part of the conveyor. According to the type of delivery, the conveyors are divided into embedded or overhead. Depending on the conveyed material, they are divided according to their construction to rolling (with or without belt), chain (with or without belt), and chain with steel lamellas

For a sideway transport, grips can be installed on the belt to prevent a possible material slipping. Those can be made of metal (U or L shaped) or vulcanized rubber.

Conveying systems consist of one conveyor or a whole conveyor route. They are designed in accordance with the way the line is operating, its input (tons per day) or depending on the conveyed material and specific customer requirements. In addition to the systems described above, we also deliver elevators, cellulose bales turn-over equipment, automatic dewiring and bale cutting equipment, and conveyors for chemicals.

Main parts

Loading part (1)
Carrying part (2)
Unloading part with a drive (3)

These basic parts vary in shape and design. The ingoing part may comprise of a loading conveyor modified according to particular requirements (with a belt, steel plates, chain-belts, rolls etc.); an elevator; handling platforms; bale turners; and a preparatory storage system etc.

Material

Materials used for conveyors respect customer’s requirements and depend on paper production technologies with regard to machine positioning and the type of technological line

Standard accessories
according to the type of conveying system

Manual lubrication of chains
Safety features (STOP buttons, rope switch, flash light with sound signalization)
Electric part, installation of electric motor without connection to the terminal board

Optional accessories
according to the type of conveying system

Waste roll cutter with a lift and clamping
Tilting table
Service bridges
Chutes
Pneumatic wire hand cutting with travel for pneumatic shears
Frequency converter
Control system
Control panels
Weighing equipment (static or in motion)
Metal detector
Bar code scanner, etc.

Machine design and work safety are in compliance with the EU standards and EAC.

Technical parameters
Type of pulper	~L1 / type L(mm)	~L1 / type Z(mm)	~L2(mm)	~H1(mm)	~H2(mm)	~B1(mm)	~B2(mm)	Max. carrying capacity (kg/m2)	Electric motor ouput (kW)
OVERHEAD
LCV-14	16 780	18 780	2 000 - 8 000	4 450	6 080	1 300, 1 500, 1 800	1 000, 1 200, 1 500	400 - 500	3 - 11
MCV-14	18 200	20 200	2 000 - 8 000	5 150	6 700	1 300, 1 500, 1 800	1 000, 1 200, 1 500	400 - 500
LCV-20	18 500	20 500	2 000 - 8 000	5 100	6 850	1 300, 1 500, 1 800	1 000, 1 200, 1 500	400 - 500	3 - 15
MCV-20	19 400	21 400	2 000 - 8 000	5 580	7 250	1 300, 1 500, 1 800	1 000, 1 200, 1 500	400 - 500
LCV-30	20 680	22 680	2 000 - 8 000	6 200	7 820	1 300, 1 500, 1 800	1 000, 1 200, 1 500	400 - 500	4 - 15
MCV-30	22 000	24 000	2 000 - 8 000	6 580	8 410	1 300, 1 500, 1 800	1 000, 1 200, 1 500	400 - 500
LCV-40	21 300	23 300	2 000 - 8 000	6 550	8 250	1 300, 1 500, 1 800	1 000, 1 200, 1 500	400 - 500	4 - 18.5
MCV-40	21 400	23 400	2 000 - 8 000	6 600	8 300	1 300, 1 500, 1 800	1 000, 1 200, 1 500	400 - 500
LCV-50	22 185	24 185	2 000 - 8 000	6 900	8 500	1 300, 1 500, 1 800	1 000, 1 200, 1 500	400 - 500	5.5 - 22
LCV-65	22 450	24 500	2 000 - 8 000	7 000	8 750	1 300, 1 500, 1 800	1 000, 1 200, 1 500	400 - 500	5.5 - 30

Advantages

Automation – reduction of operating costs
Reduction of accidents
Increase of conveying speed

Category
Cultural / Industrial
Length
4 feet
Width
12 feet
Height
10 feet
Weight
580 kg
Space Require
14 sq. feet

Company Presentation